PLANTCRAFT Double Wheelie Bin Storage Enclosure: A Practical Outdoor Storage Guide for Australian Homes

Testing statement: Firebusters has not personally tested this enclosure. This guide is based on current PLANTCRAFT/Edisons product specifications and supplier information. Specifications and inclusions can change, so confirm the current listing before purchase.

PLANTCRAFT Double Wheelie Bin Storage Enclosure

The PLANTCRAFT double steel wheelie-bin enclosure is designed to conceal and organise two standard 240L household wheelie bins.

It uses galvanised steel panels, two separately opening front doors, brass locking catches and a sloping roof-style top.

Current Specifications

Product Card

Will Two Australian Wheelie Bins Fit?

The supplier specifically states that the enclosure is designed for two standard 240L wheelie bins.

That is more useful than simply describing it as a “double bin shed”. However, Australian council bins are not universally identical.

Before ordering, measure each bin:

• overall height, including the lid
• maximum width across the wheels or handles
• front-to-back depth
• clearance required to wheel the bin through the doorway

Also consider whether your council uses a larger or differently shaped garden-waste bin.

Overall Space Required

The enclosure itself measures approximately:

• 148cm wide
• 80cm deep
• 117–120cm high

The height varies because of the sloping top.

Do not plan only for the 148 × 80cm footprint. Additional clear space is needed in front so the doors can open and the bins can be rolled in and out comfortably.

Check nearby:

• fences
• walls
• downpipes
• air-conditioning equipment
• garden beds
• gates
• paths and driveway access

Galvanised Steel Construction

The body is specified as galvanised steel.

Galvanising provides corrosion resistance, which is useful for outdoor storage, but it should not be treated as immunity from corrosion.

Scratches, damaged coatings, coastal exposure, fertilisers, chemicals and prolonged moisture can all affect metal over time.

Basic care includes:

• keeping accumulated dirt and organic matter away from the base
• cleaning with water and mild detergent when needed
• checking panel edges and fasteners periodically
• addressing damaged protective surfaces before corrosion develops

Is It Weatherproof?

Edisons describes the enclosure as weather resistant and also uses “weather proof” wording in its promotional highlights.

Firebusters would treat this as an outdoor storage enclosure rather than assume it forms a watertight cabinet.

The sloped top is designed to help water drain away, but wind-driven rain, condensation and gaps around doors or panels may still occur.

This normally matters less for plastic wheelie bins than it would for storing tools, cardboard or other moisture-sensitive items.

Doors and Brass Catches

There are two separate front doors, allowing each bin to be accessed independently.

The supplier describes anti-rust brass locks or catches that:

• hold the doors closed
• help prevent them opening in wind
• may help deter animals from accessing the bins

These features should not be confused with a tested high-security locking system.

If security against deliberate entry is important, assess the door construction and locking hardware yourself before relying on the enclosure.

Animal Access

A closed steel enclosure may help reduce casual access by dogs and some wildlife compared with leaving bins fully exposed.

However, the product does not provide a published pest-resistance rating.

Keeping bin lids properly closed and cleaning food residue remains important.

Ventilation

The supplier states that the enclosure is ventilated.

That is useful because completely sealing household rubbish bins inside another enclosure can trap heat, moisture and odours.

However, the current specification does not publish an airflow rate or detailed ventilation design.

Ventilation should therefore be treated as a design feature rather than an odour-control guarantee.

Base and Installation

The enclosure requires assembly.

A flat and stable site will make assembly, door alignment and everyday use easier.

Possible locations include:

• a suitable concrete area
• level paving
• another firm, level outdoor surface appropriate for the installation

A soft or uneven base may allow the enclosure to move or twist, making the doors harder to align.

What About Anchoring?

If the installation is:

• on an exposed side of the house
• in a high-wind location
• on an open rural property
• near vehicles or pedestrian areas

check the current manual or contact the supplier regarding suitable anchoring before installation.

Any anchors should be appropriate for both the enclosure design and the base material.

25kg Product Weight

The assembled enclosure weighs approximately 25kg.

The packaged carton is approximately 27kg and measures 40 × 120 × 14cm.

This means the flat-packed carton is reasonably compact, but handling should still be planned safely.

Two people may make assembly easier, particularly when aligning larger panels.

Placement Beside the House

Consider everyday bin movement before fixing the enclosure into position.

A location that looks neat may become frustrating if:

• the doors cannot fully open
• the bins must be lifted over a step
• a narrow path makes turning difficult
• the enclosure blocks a gate
• the bins are difficult to wheel to the kerb

The best location usually balances appearance with the normal route from the house to the collection point.

Maintenance

Routine care is straightforward:

• wash dirt from steel panels as required
• remove leaves and wet debris from around the base
• inspect catches and hinges
• check that fasteners remain tight
• look for scratches or early corrosion
• keep bin lids clean and properly closed
• check door alignment if the base settles or moves

What This Enclosure Is Not

It is important not to overstate what the product provides.

The current supplier information does not establish that it is:

• a certified high-wind structure
• a tested security cabinet
• completely watertight
• a fire-resistant enclosure
• compatible with every council bin size

It is best viewed as a practical outdoor enclosure for concealing and organising two compatible household wheelie bins.

Steel vs Timber or Plastic Bin Storage

A galvanised-steel enclosure offers different trade-offs from timber or plastic alternatives.

Steel

• relatively rigid construction
• does not require timber staining or painting as routine maintenance
• can still scratch or corrode
• may become warm in direct sun

Timber

• can blend naturally with fences and landscaping
• may require periodic coating or staining
• can swell, split or deteriorate with moisture

Plastic or Resin

• generally lighter
• does not rust
• may be easier to move
• light weight may also increase the importance of securing the enclosure in exposed locations

Buyer Checklist

• Measure your actual wheelie bins.
• Confirm they are compatible with the supplier’s 240L specification.
• Allow at least the 148 × 80cm enclosure footprint.
• Allow additional front clearance for both doors and bin movement.
• Check the site is flat and stable.
• Consider exposure to strong wind.
• Check current anchoring guidance before fixing it down.
• Do not assume “weather resistant” means completely watertight.
• Check whether brass catches provide enough security for your needs.
• Remember that assembly is required.

Frequently Asked Questions

How many bins does it hold?

The enclosure is designed for two standard 240L wheelie bins.

What are the overall dimensions?

Approximately 148cm wide × 80cm deep × 117/120cm high.

How heavy is it?

The assembled product is listed at approximately 25kg.

How heavy is the carton?

The packaged weight is approximately 27kg.

Is it galvanised?

Yes. The current specification describes the body material as galvanised steel.

Does each bin have its own door?

Yes. Two separate front doors provide access to the two bin positions.

Is it lockable?

The supplier describes anti-rust brass locking catches. These can help keep the doors closed and deter casual animal access, but the product is not presented as a certified security cabinet.

Is it weatherproof?

The supplier describes it as weather resistant and promotes the sloping top for drainage. Firebusters would not interpret that as a guarantee that the enclosure is completely watertight.

Is it ventilated?

Yes, the supplier states that the design keeps the bins ventilated, although no airflow specification is published.

Does it need to be anchored?

The current product page does not publish a specific anchoring system or wind rating. For exposed sites, check the latest manual or supplier advice before installation.

Does it arrive assembled?

No. Assembly is required.

Final Assessment

The PLANTCRAFT double steel wheelie-bin enclosure provides a straightforward way to conceal two standard 240L household bins.

Its confirmed features include galvanised-steel construction, two front doors, brass catches, ventilation, a sloping top and a 25kg assembled weight.

The main things to check before ordering are your actual bin dimensions, the 148cm installation width, door clearance and how the enclosure will be secured at your particular site.

Firebusters recommendation: it is worth considering where visual tidiness and two-bin storage are the main priorities, particularly where you have a level installation area. For exposed or windy locations, investigate anchoring before purchase rather than relying on the enclosure’s weight alone.

Research Source

• 
  Edisons – PLANTCRAFT Double Steel Wheelie Bin Storage Enclosure
  

Specifications, availability and warranty conditions can change. Confirm the current product listing and assembly instructions before purchase and installation.