PROTEGE 2 Inlet Grey Water Pump for Bathroom Fixtures, Shower, Basin, Bath
Transform your bathroom or laundry layout with reliable wastewater management—no complex plumbing or gravity drainage required. The PROTEGE 2 Inlet Grey Water Pump is designed for Australian homes who want flexibility in renovations or additions, letting you place showers, basins, and baths where you need them, upstairs, downstairs, or in tricky spaces. Enjoy clean operation, minimal noise, and proven dependability with every use.
- Quiet, compact 200W copper wound motor
- Double inlet—run two fixtures at once
- Automatically pumps up to 8m vertical, 80m horizontal*
- Non-return valve to protect against backflow
- Australian-approved & compliant
- TUV, GS & CE certified build quality
Trusted Performance
- Backed by a 2-year Protege warranty
- Superior seal quality and safety standards
- Dedicated local merchant support from Edisons
Quick Facts
- 200W silent copper wound motor
- 2 inlets: Connects up to shower, basin, or bath
- Pumping reach: 8m vertical / 80m horizontal*
- Non-return valve for hygiene and system protection
- Hands-off, fully automated operation—triggered by drain use
- Supplied with hose clamps, blanking plugs, and rubber feet
- Australian-compliant 1.7m power cord
* Max distances are manufacturer ratings and depend on your pipe sizing and installation. For best results, crosscheck with a plumber and inspect the merchant’s detail page.
Best For
- Renovations or retrofits in spaces with no direct gravity drainage
- Installing bathrooms or laundries in basements, attics, or additions
- Ensuites, second bathrooms, or hobby spaces needing concealed plumbing
- Aussie households seeking a tidy, reliable way to handle grey water
Not Ideal For
- Commercial kitchens or heavy industrial waste needs
- Kitchens sinks or dishwashers (food matter and grease)
- Full sewage or toilet waste—use a macerator pump for those requirements
- PROTEGE 2 Inlet Grey Water Pump
- Hose clamps for secure connection
- Blanking cap plugs for unused ports
- Noise and vibration-damping rubber feet
Why Choose the PROTEGE 2 Inlet Grey Water Pump?
If your creative bathroom ideas are held back by traditional plumbing, this grey water pump gives you freedom—place fixtures where you want, not where old pipes dictate. The PROTEGE pump self-activates when you use any connected fixture. Fitted rubber feet keep operational noise respectfully low, and premium seals mean long-term peace of mind. Each unit is Australia-ready and purpose engineered for easy compliance, letting you focus on design—not drainage headaches.
Tip: Have your licensed plumber check exact pipe distances, heads, and installation needs for best performance and warranty cover.
PROTEGE 2 Inlet Grey Water Pump for Bathroom Fixtures, Shower, Basin, Bath
Check the current merchant listing for full product details, compatibility notes, dimensions, included items, and product-specific guidance before you buy.
How the PROTEGE Grey Water Pump Works
The pump discreetly collects grey water from any two connected bathroom fixtures. When water arrives, smart sensors activate the efficient motor to evacuate water to a drain or holding tank—even when plumbing is tricky or distant. Non-return valves make sure waste only moves one way. This solution helps bring your dream bathroom or laundry to life, whether it’s downstairs, upstairs, or in a renovation where gravity just won’t help.
- Connects up to two fixtures easily
- Activates instantly when water flows in—no switches to remember
- Keeps water moving quietly and efficiently away from your home
For creative projects or challenging locations, always refer to the full installation guide at Edisons or confirm details with your qualified installer.
Installation & Compatibility Checks
- Have your setup designed and fitted by a licensed plumber (protects warranty & safety)
- Assess run lengths—vertical and horizontal reach to final drain point
- Confirm it matches your chosen fixtures (showers, basins, baths only)
- Rubber feet and included clamps make for a quieter, neater install
- Read all up-to-date requirements and tips at the merchant’s page before any work begins
Frequently Asked Questions
Absolutely. The dual inlets are made for connecting up to two different bathroom fixtures, most commonly a shower and a basin, or different combinations including baths.
The inbuilt sensors trigger the pump as soon as water is detected, so operation is hands-free and incredibly easy.
No, it’s designed strictly for grey water from bathroom fixtures—showers, basins, and baths. Kitchen or toilet waste can cause issues, and for those, you’ll need a dedicated macerator or a different solution as outlined on the merchant page.
This model is engineered for low acoustic impact, with a copper wound motor and noise-dampening rubber feet. You’ll hear a soft hum only while it’s active, but most users find it unobtrusive in daily use.
Start by carefully measuring your pipe runs and reviewing the complete technical guide at Edisons. Always ask your plumber to check for local compliance, and confirm it will fit your chosen fixtures and setup.
Your Trusted Australian Source
- Real Protege quality – known and trusted Down Under
- Clear aftersales support and warranty from Edisons
- Meets or exceeds local compliance benchmarks for household grey water equipment
PROTEGE 2 Inlet Grey Water Pump for Bathroom Fixtures, Shower, Basin, Bath
Check the current merchant listing for full product details, compatibility notes, dimensions, included items, and product-specific guidance before you buy.
Summary
The PROTEGE 2 Inlet Grey Water Pump is the go-to choice for homeowners who value flexibility, neat solutions, and trouble-free grey water management. With its automated function and reputable design, you’re free to create or upgrade your bathroom layout just the way you want, even in challenging locations. As always, confirm dimensions and local install codes before getting started, and check Edisons for the latest updates, support and documentation.
