Protege 1.5HP Submersible Bore Water Pump Deep Well Irrigation Stainless Steel
Tough seasons, fluctuating water tables, and the need for steady water supply demand a pump you can trust. The Protege 1.5HP Submersible delivers robust irrigation for Australian rural, commercial, and large residential properties. Its resilient stainless steel and brass build, paired with a trusted 1.5HP motor and excellent flow at depth, mean less worry and more water, where and when you need it most.
Quick Facts
- Motor: 1.5HP / 1.1kW single-phase
- Max suggested bore depth: 108m
- Max head: 110m
- Outstanding flow rate: Up to 83L/min @ 38m
- Housing: 304-grade stainless steel & brass fittings
- Outlet size: 1.25″ brass
- Protection: IP68-rated for submersion
- Controller: Weather-sealed, pre-wired included
- Mounting: Vertical or horizontal
- Warranty: 12 months Australian support
Who is This Bore Pump Suited For?
- Best for:
- Primary and backup water supply from deep wells and bores
- Properties needing sustained heavy flow for irrigation
- Rural blocks, small farms, and large home gardens with deep water tables
- Anyone preferring plug-and-play installation with local warranty
- Not ideal for:
- Bores >108m deep (exceeds max depth rating)
- Saltwater extraction or highly contaminated water
- Small tanks or shallow wells where a less powerful pump makes more sense
- Environments needing three-phase or non-standard outlets
If your setup calls for rugged reliability, generous flow, and straightforward compatibility, the Protege 1.5HP is designed to help Australian landowners and tradies deliver results with confidence.
A Closer Look: Performance at Depth
This model is purpose-built to overcome both deep draw-downs during dry periods and substantial daily demand. See how the flow rates shift as you install this pump deeper:
Flow Rate Reference Table
- 83 L/min at 38m depth
- 67 L/min at 64m
- 50 L/min at 86m
- 42 L/min at 93m
- 33 L/min at 99m
- 25 L/min at 103m
- 17 L/min at 108m
Max recommended immersion depth: 108 metres
Number of impellers: 14 (for smooth, consistent output)
Results may vary in the field. Check your existing bore’s static and drawdown levels to confirm you’ll achieve optimal results in your location.
Installation Guidance & Verifications
The Protege pump is engineered for both ease-of-use and maximum protection against water and environmental hazards. Setup is accessible for capable DIYers, but a qualified installer is recommended for first-time or mains-connected bore systems. The included pre-wired weatherproof controller helps to minimise install time and boosts reliability.
- Fully submersible (IP68) casing for harsh bore environments
- Single-phase motor, 10 amp plug for straightforward compatibility
- Plug suited for most Aussie rural and semi-rural supplies
- Standard 1.25″ brass outlet for flexible plumbing
- Can be installed vertically or horizontally to suit well geometry
- Controller provided for safer, faster commissioning
Pre-Purchase Checklist
- Is your bore or well less than 108 metres deep?
- Is your water source fresh and relatively clean? (not suitable for salt, silt-heavy or corrosive waters)
- Is your power supply 10 amp, single-phase compatible?
- Do you have 1.25″ outlet fittings, or the correct adaptors ready?
- Is professional installation booked for peace of mind?
If unsure, reach out to the merchant or your installer with your measurements before purchase to guarantee a smooth installation.
Why Buy From Edisons?
- Authorised Protege stockist
- Locally supported warranty and customer advice
- Comprehensive pre-sale documentation
- Australian-based fulfilment and support services
Your purchase is covered by a 12-month Australian warranty, and Edisons provides direct access to hassle-free aftercare and spare parts when needed.
Protege 1.5HP Submersible Bore Water Pump Deep Well Irrigation Stainless Steel
Check the current merchant listing for full product details, compatibility notes, dimensions, included items, and product-specific guidance before you buy.
Frequently Asked Questions
The Protege 1.5HP is built for wells and bores up to 108 metres in depth. Always verify your bore’s actual depth before purchase or installation.
Yes, a pre-wired IP-rated controller comes with the pump, making your installation safer, faster, and more reliable.
No, this pump is intended for fresh water only. Saltwater and caustic or highly contaminated water sources may damage the internals and void the warranty.
For most users, professional installation is strongly recommended. This guarantees electrical safety, proper sealing, and protection of your warranty coverage. If unsure, always consult an electrician or pump specialist.
Support and warranty claims are handled by the Australian-based Edisons team. Reach out via their contact channels for fast, localised assistance and parts access.
Protege 1.5HP Submersible Bore Water Pump Deep Well Irrigation Stainless Steel
Check the current merchant listing for full product details, compatibility notes, dimensions, included items, and product-specific guidance before you buy.
Ready for Hassle-Free Water Security?
For those managing rural homesteads, irrigation systems, or off-grid property needs, the Protege 1.5HP Submersible Bore Water Pump offers a harmonious balance of power, long-term durability, and installation confidence. Shop through Edisons today to access direct technical support, reliable aftercare, and a solution designed for the unique demands of Australian landowners.
