Bushranger 2.0m x 2.5m Awning: Balanced Guide for 4WD & Camping Use
The Bushranger AW2000 is a conventional vehicle-mounted roll-out awning providing approximately 2.0m × 2.5m of shelter beside a 4WD, van, caravan, camper trailer or other compatible vehicle.
Its strongest published features are a 600D rip-stop polyester canopy, 3000mm hydrostatic-head water rating, UPF 50+ protection, heavy PVC travel cover and included mounting and anchoring hardware.
Its biggest limitation is not the fabric specification—it is weather management. Bushranger does not publish a numerical wind-speed rating for the AW2000, so the flexible joints should not be interpreted as proof that the awning can remain erected in strong wind.
Testing statement: Firebusters has not personally tested or operated the Bushranger AW2000. This guide is based on current Bushranger and retailer-published information.
Verified AW2000 Specifications
| Model / part number | AW2000 |
| Awning coverage | Approximately 2.0m wide × 2.5m extension |
| Maximum setup height | Up to approximately 2.1m |
| Canopy fabric | 600D rip-stop polyester canvas with PU coating |
| Sun protection | UPF 50+ |
| Water rating | Manufacturer states waterproof; 3000mm hydrostatic-head rating |
| Transit cover | 1200D / 680g PVC fabric, UV stabilised |
| Main beam | Twin-channel aluminium extrusion |
| Joints | Flexible PE composite, approximately 180° movement |
| Poles | Anodised aluminium telescopic poles with twist locks |
| Included hardware | Mounting brackets, stainless-steel fasteners, pegs and guy ropes |
| Warranty | 2 years |
Size and Weight: One Specification Needs Qualification
A current Bushranger retailer lists the AW2000 as:
- Closed: approximately 2055 × 90 × 110mm
- Open: approximately 2500 × 2000 × 2100mm at maximum height
- Weight: approximately 10kg
These dimensions are useful when planning roof-rack space, garage clearance and vehicle load, but Bushranger’s current official product page does not itself state the closed dimensions or weight.
Will It Fit Your Roof Rack?
Bushranger says the AW2000 is intended to attach to either side of most roof-rack and roof-bar systems.
That should not be interpreted as universal fitment.
Before buying, check:
- available mounting length on the vehicle
- roof-rack or cross-bar design
- mounting-point spacing
- rack manufacturer’s accessory-mounting instructions
- vehicle roof-load limits
- clearance around doors, tailgates and roof accessories
- garage and carport clearance once installed
The package includes mounting brackets and stainless-steel fasteners, but a non-standard rack may require different or additional hardware.
Understanding the Fabric Specification
Bushranger specifies a 600D rip-stop polyester canopy with a polyurethane coating.
The published water-resistance specification is a 3000mm hydrostatic head. This is a more useful piece of information than simply describing an awning as “waterproof”.
The canopy is also listed as:
- UPF 50+
- UV stabilised
- mould resistant
- stitched and welded at the seams
The storage cover is substantially heavier 1200D / 680g PVC material designed to protect the rolled awning during vehicle travel and storage.
None of these ratings means the awning can remain erected indefinitely in severe weather. Fabric water resistance and structural wind resistance are separate issues.
There Is No Published Numerical Wind Rating
This is the most important limitation to understand.
Bushranger describes flexible PE composite joints that can move through approximately 180 degrees and are intended to reduce damage to the poles and legs when movement occurs.
That is useful engineering, but it is not the same as a tested wind-speed rating.
We could not locate a manufacturer-published maximum wind speed for the AW2000.
I would specifically avoid inventing a figure such as “safe to 30km/h” or “safe to 40km/h” unless Bushranger publishes one for this exact model.
Guy Ropes and Pegs Matter
Bushranger supplies guy ropes and pegs for securing the awning legs.
How well they work depends heavily on the ground.
Firm soil may hold an ordinary peg well. Loose sand, soft ground or rocky campsites may require a different anchoring solution appropriate to the site.
Do not rely on the vehicle mounting brackets alone to control an extended awning when wind can act underneath or across the canopy.
Also check the anchoring points and guy ropes during an extended camp. Ground can soften after rain and ropes can loosen as fabric and poles move.
Rain: Give Water Somewhere to Go
The 3000mm hydrostatic-head rating is useful in rain, but the awning should still be pitched so water can drain from the canopy.
A flat canopy can allow water to pool. The accumulated mass of water can increase load on the fabric, poles, joints and mounting system.
When rain is expected:
- create adequate fall towards a safe drainage side
- keep water away from doors and commonly used walking areas
- check periodically for pooling
- do not rely on fabric waterproofing to compensate for poor setup
Packing and Storage
The awning rolls into its PVC transit cover and is held with two hook-and-loop straps before the outer bag is closed with its double zipper.
For longer fabric life:
- remove loose dirt before packing where practical
- avoid storing the canopy wet for extended periods
- reopen and thoroughly dry it after wet-weather packing
- inspect fabric, seams, poles, joints and guy ropes periodically
- check mounting bolts and brackets before long trips
- inspect the PVC transit cover for damage caused by branches, UV exposure or travel
Who Does the AW2000 Suit?
Potentially a good fit
- 4WD touring
- camping beside a vehicle
- caravans and camper trailers with suitable mounting
- day-trip shade
- roadside rest stops
- users wanting a simple rectangular roll-out awning
Consider another setup if
- your roof system has very little spare load capacity
- you need a freestanding shelter
- you regularly camp in exposed high-wind locations
- you want a large 270-degree vehicle awning
- you need confirmed modular wall compatibility
- you need an awning with a published wind certification
Before You Buy
- Confirm AW2000: Ensure you are looking at the 2.0m × 2.5m model rather than Bushranger’s other awning sizes.
- Measure the rack: Check the mounting length and bracket locations available on your vehicle.
- Check roof load: Include the awning and its brackets when assessing the roof/rack load.
- Confirm weight if critical: Retailer data lists approximately 10kg, but the current Bushranger page does not specify the weight.
- Think about campsites: Sand, rock and soft ground may require more suitable anchoring equipment.
- Do not assume a wind rating: Bushranger does not publish a numerical wind limit on the current AW2000 product page.
- Check warranty: The current manufacturer specification lists a two-year warranty.
Frequently Asked Questions
What is the exact Bushranger model?
The 2.0m × 2.5m awning is part number AW2000.
How large is it when open?
The canopy provides approximately 2.0m × 2.5m of coverage. Maximum published setup height is around 2.1m.
How much does the AW2000 weigh?
A current retailer lists approximately 10kg. Bushranger’s own current product page does not publish the weight, so confirm this if vehicle roof loading is important.
Is the awning waterproof?
Bushranger describes the PU-coated polyester canopy as waterproof and publishes a 3000mm hydrostatic-head rating. Correct setup and drainage are still important during rain.
What is its UV rating?
Bushranger publishes an UPF 50+ rating.
Does it fit every roof rack?
No universal fit should be assumed. Bushranger says it suits most roof-rack and roof-bar systems, but buyers should confirm their particular rack, mounting arrangement and roof-load capacity.
Does Bushranger give a maximum wind speed?
We could not find a numerical AW2000 wind-speed rating in Bushranger’s current published product information. The flexible joints should not be treated as a wind rating.
Are pegs and guy ropes included?
Yes. Bushranger lists mounting brackets, stainless-steel fasteners, pegs and guy ropes among the supplied equipment.
Can it be fitted to a caravan or camper trailer?
Bushranger specifically lists caravans, camper trailers and horse floats among potential applications, provided an appropriate mounting arrangement is available.
Has Firebusters tested this awning?
No. Firebusters has not personally tested or installed the AW2000.
Final Assessment
The Bushranger AW2000 has a fairly straightforward specification: 2.0m × 2.5m coverage, 600D PU-coated polyester, UPF 50+, a 3000mm hydrostatic-head rating, anodised aluminium components, flexible PE joints and included mounting and anchoring hardware.
That makes it a reasonable vehicle-mounted shelter format for camping, touring and general outdoor use where a simple roll-out awning is preferred.
The important limitations are equally clear. Fitment must be checked against the actual roof rack, the awning adds weight to the vehicle’s roof system, and there is no published numerical wind-speed rating for this model.
Our recommendation: consider the AW2000 if you want a conventional 2.0m-wide vehicle awning and your rack can accommodate it. Give equal attention to mounting, anchoring, drainage and changing weather rather than judging the product solely by its fabric specification.
Research Sources
-
Bushranger – AW2000 2.0m × 2.5m Awning
-
4WD Gear Accessories – AW2000 dimensions and retailer-listed weight
Research checked September 2026. Specifications, availability and warranty conditions can change.
General information only. Firebusters has not personally tested this product. Follow the current Bushranger installation, care and safety instructions supplied with the awning.
