BAUMR-AG 2400W 355mm 14″ Metal Cut Off Cold Saw
Quick Facts
- Motor: 2400W, copper wound
- Blade: 355mm ceramic alloy, low-spark
- Angle Cuts: Tool-free mitre fence +/- 45°
- Soft Start: Smooth, low-stress startup
- RPM: 1200 for efficient cold cutting
- Measurement Scale: For precise lengths and mitres
- Safety: Full blade guard & intentional power switch
- Multi-material: Cuts steel, aluminium, brass, plastics & more
Trust & Confidence
- Australian workshop tested and supported
- Engineered safety: intentional start and blade guarding
- Merchant: Edisons, known for reliable after-sales care
What Sets the Baumr-AG 2400W Apart?
At the heart of this cold saw is a ceramic alloy tooth blade engineered to deliver rapid, low-friction cuts with minimal heat. Unlike abrasive wheels, this blade produces barely any sparks, so you’ll spend less time tidying up and more time getting on with your next task. The integrated zero-gravity armature design helps reduce arm and shoulder strain, especially on repetitive jobs or awkward mitres.
- Dedicated soft start module for safer operation and reduced load on circuits
- Rapid, easy-to-read measurement scale for perfect cut lengths every time
- Quick clamp mini-vice guarantees repeat accuracy
- Blade performs equally well on steel, aluminium, brass, selected timbers, and rigid plastics—no frequent swaps needed
- Fully shielded blade with mechanical safety lock helps prevent accidental activation
If you need reliability under pressure, from site cut-downs to home renovations, this saw’s robust build and fail-safe design offer peace of mind and sharp, professional results.
Best For & Not Ideal For
Best for
- Metalworkers and fabrication shops
- Renovators seeking high-quality, burr-free cuts
- Workshops requiring frequent mitre and repeat cuts
- Multi-material cutting—metals, pipes, plastics, some woods
Not ideal for
- Fine or precision jewellers—blade and scale target larger sections
- Portable or job site work where stable power isn’t available
- Those wanting compact, handheld profile tools
Material Range & Workshop Uses
This model is remarkably adaptable, letting you work confidently with a huge breadth of metals and even construction plastics. Expect crisp finishes and less need for re-cutting or excessive filing.
- Steel (square, round, angle iron, beams, rebar, box)
- Aluminium and non-ferrous alloys
- Brass, copper and bronze
- Wrought iron for gates and fences
- plastics and certain timbers (with compatible blade)
From fence panels to furniture frameworks, the included ceramic blade supports a diversity of jobs without excessive wear or frequent changes.
BAUMR-AG 2400W 355mm 14" Metal Cut Off Cold Saw, Premium Low Spark Ceramic Alloy Tooth Blade, Measurement Scale, Soft Start, 45 Degree Mitre Chop Cutting
Check the current merchant listing for full product details, compatibility notes, dimensions, included items, and product-specific guidance before you buy.
Technical Specifications
| Voltage | 240V 50Hz |
| Motor | 2400W copper wound |
| Blade Type/Size | 355 x 3 x 25.4 mm, ceramic alloy |
| Speed | 1200 RPM |
| Max Cut (Rectangular 90°) | 210 x 85 mm |
| Max Cut (Rectangular 45°) | 135 x 43 mm |
| Max Cut (Square 90°) | 120 x 120 mm |
| Max Cut (Square 45°) | 85 x 85 mm |
| Max Cut (Round 90°) | 130 mm |
| Max Cut (Round 45°) | 90 mm |
| Max Cut (Angle Steel 90°) | 200 x 200 mm |
| Max Cut (Angle Steel 45°) | 130 x 130 mm |
Verify the fit for your planned cuts and application on the Edisons product page to ensure successful setup and safe operation.
FAQ: Common Questions About the Baumr-AG Cold Saw
Most users will need to install the blade and perform some minor alignment or adjustments out of the box. Clear instructions and tools are provided to help you get started rapidly.
Yes, the supplied blade is designed for general workshop metals including steel, brass, aluminium, bronze, and copper. Refer to your manual for best practices and safe cutting speed.
The cold saw can cut a range of rigid plastics and many timber profiles, though productivity and finish may be higher with blades tailored to non-metal work. Always check material compatibility and wear PPE.
The saw’s tool-free fence system and built-in scale allow you to set and lock in common angles, including up to +/- 45°, for fast, accurate work.
Regular cleaning, blade inspection and tightening, and periodic checks for dust build-up will keep your saw cutting true and safe. Consult your manual for detailed recommendations.
BAUMR-AG 2400W 355mm 14" Metal Cut Off Cold Saw, Premium Low Spark Ceramic Alloy Tooth Blade, Measurement Scale, Soft Start, 45 Degree Mitre Chop Cutting
Check the current merchant listing for full product details, compatibility notes, dimensions, included items, and product-specific guidance before you buy.
Why Choose Baumr-AG for Your Workshop?
The BAUMR-AG 2400W Cold Saw blends commercial-grade strength with a user-friendly approach, making it a practical upgrade for Australian workshops seeking tidy, accurate cuts. The soft start feature enhances tool longevity, and the blade’s refined profile produces minimal mess—making lengthy projects genuinely easier. Support and spares are straightforward via Edisons, meaning confident long-term ownership.
- Safer, controlled cutting: Blade guard, safety release and measured power-up
- Multi-purpose performance: Seamlessly handles various metals and rigid non-metals
- Backed locally: Proven support for Australian trades and enthusiasts
Ready to Supercharge Workshop Projects?
Don’t settle for messy, hazardous cut-offs or time-consuming clean-up. The Baumr-AG 2400W Metal Cut Off Cold Saw helps safeguard your results and your workspace. Engineered specifically for Australian fabricators, renovators and ambitious home projects, it’s the smart step toward sharper, calmer, and faster builds. Hit the link above to view the current listing, explore detailed images, or connect to the merchant for tailored support and further advice.
